Single-Stage MORStak Drum Rackers
Manufacturer: Morse
FOB: East Coast Warehouse
The Problems:
- Hazards of moving drums on and off upper racks
- Handling drums where a forklift will not fit
- Lifting drums from upright to horizontal
The Solution: The affordable MORStak Drum Rackers:
- Rack your drums up to 56" high.
- Stack drums side by side with virtually zero clearance
- Easily lift, move and rack a drum
- Simple to operate
- Compact base with 6 foot turning radius
- Capacity: 800 lbs.
With the MORStak Drum Racker you can easily and safely lift an upright drum from the floor, tilt it to horizontal, transport it, and set it into a drum rack up to 56" high. Then reverse the entire process to retrieve your drum from the rack.
MORStak Drum Rackers replace expensive lift trucks. They eliminate hazardous "bare fork" handling of drums, upends and down-ends of drums, and they move in tighter spaces. MORStaks handle a drum with faucet and vent in place so the rack may serve as a multiple drum dispensing station.
The most dense racking is possible because drums need not be separated. Lifting arms fit easily into the spaces below the curvature of the drum. This enables the most efficient use of storage space.
Designed to handle 55 gallon steel or plastic drums with suitable rims. Capacity is 800 lbs. The 5” diameter front wheels fit under your drum rack.
Single-stage MORStak Drum Rackers provide reach for a two tier drum rack with top shelf as high as 56".
Two easy-to-use valve handles control the power lift and tilt functions. A visual indicator informs the operator of the recommended height for tipping drums. Special features prevent tilting drum from horizontal until operator secures drum in place. Choices of Air, AC, or 12V DC powered lift and tilt are available.
- Model Info